-
Out of stock
SKU# DMX-ADD-MODThe DMX Address Module is used to set the starting address of our Direct DMX RGB LED tape lighting. This module allows the user to manually set starting addresses of segments where the automatic addressing of 001 is unwanted. This module requires a 5VDC power supply which can be obtained from a parallel connection to the tape lightings power supply. Simply connect the main DMX input to the “IN” AND THE “OUT” GOES STRAIGHT TO THE led Pixel Strip XLR 5-Pin DMX input. For every new readdressed starting point, you will need to make sure to add a 5-pin XLR Harness and DMX Filter Module to you new segment runs. Video(s): Downloadable Documentation: DMX Address Module Datasheet Compatible Strip(s): Direct DMX RGB LED Tape Lighting Accessories: 5-Pin XLR Harness, DMX Filter Module -
SKU# ECXXX-PK10Overview: Complete your waterproof LED tape (strip) lighting applications with waterproof endcaps for your leads and tales. These standard endcaps are useable for tape lighting with 10mm and 12 mm width flexible PCBs with options for with or without holes. Solid endcaps can be used to terminate ends where “no” protruding wires will be present. Endcaps with holes can be used where protruding wires “will” be present for lead wires used to run power and/or data signal. All endcaps will require a silicone sealant to bond and secure cappings into place. Applications: For use with IP67 (silicone sleeved) or IP68 (silicone extruded/injected) tape lighting. Accessories: Clear RTV Silicone Sealant #LED-RTV-SIL Silicone Bracket #5050-sb-kit ** End Cap with Holes may require slight modification in order to accommodate various LED strip wire configurations. Package Contains 10 End Caps End Caps Datasheet SKU# ECXXX-PK10 -
SKU# 5050-sb-kitThe Silicone Bracket Kit includes 15 brackets and 30 screws. Used to securely install your 5050 IP67 or IP68 strips. SKU# 5050-SB-KIT -
SKU# LED-RTV-SILOverview: Reseal your waterproof LED Strips with this clear silicone sealant. This non-toxic, non-polluting sealant is great for electronic components. This product works at room temperature with metal and non metal materials. It is also excellent when used as a form of electrical insulation/resistance, aging resistance, and moisture proofing. This product is tested to work with all SIRS-E Waterproof strips and Waterproof End Caps. Applications: Used for bonding, sealing, or insulating of:- Electronics
- Semiconductor materials
- Electrical equipment
- Magnetic tile
- Optical instruments
-
-
SKU# SS4PER FT. Professional Series Commercial Speaker Cable. 4 Conductor, 13 AWG Speaker Cable, Black, Per Ft. NOTE: PLEASE CONTACT US FOR ROLLS SPECIAL PRICE SKU# SS4 -
SKU# RJ45-MK2-5Heavy Duty RJ45 to XLR Male or Female OMX Cable Adapter 3ft by SIRS-E 5 Pin: RJ45-XLRM5-MK2: Male RJ45-XLRF5-MK2: Female 3 Pin: RJ45-XLRM3-MK2: Male RJ45-XLRF3-MK2: Female Applications: LED Decoders Length: 3ft Made in USA RJ45 TO XLR DATASHEET SKU# RJ45-MK2-5 -
SKU# RJ45-6F-MK2Heavy Duty CAT5, RJ45 to RJ45, 6ft long Cable by SIRS-E Length: 6ft Connector: RJ45 Made in USA Quick Links: SKU# RJ45-6F-MK2 -
SKU# Pilotino-WifiIntroduction The PILOTINO® WiFi PCB is a connectivity expansion device intended for use with the PILOTINO® PCB CV LED decoder. This device is a plug and play unit that instantly equips the PILOTINO® PCB with a WiFi Network Connection. The PILOTINO® WiFi PCB is compatible with any kind of Art-Net app, allowing the user to easily integrate it into any project. Equipped with an onboard IO socket, the module easily connects directly to the PILOTINO® PCB, making for an effortless configuration. Just connect the device to the IO socket and it is ready to go. This device is compatible with any sort of Network Based DMX control system, including Art-Net. Video: Pilotino® Feature Video Key Features:- WiFi mode: Station/SoftAP
- Compatible with any ArtNet App
- Robust Wireless 2.4GHz Signal
- Onboard IO socket for quick integration
- Wire to Board Quick Connectors
- Plug and Play with Onboard IO Socket
- 5 Year Limited Warranty
- Made in Italy
-
SKU# Pilotino-CRMXIntroduction The PILOTINO® CRMX PCB is a connectivity expansion device intended for use with the PILOTINO® PCB CV LED decoder. This module is a plug and play unit that instantly equips the PILOTINO® decoder with robust CRMX wireless capabilities. The PILOTINO® CRMX PCB is compatible with any kind of CRMX transmitter, allowing the user to easily integrate it into any project. Equipped with an onboard IO socket, the module easily connects directly to the PILOTINO® PCB, making for an effortless configuration. Just connect the device to the IO socket and it is ready to go. Pair it with the CRMX transmitter of your choice and you are done. Video: Pilotino® Feature Video Key Features:- Compatible with any CRMX Device
- Robust Wireless Signal
- RDM Compatible
- Onboard IO socket for quick integration
- Wire to Board Quick Connectors
- Plug and Play with Onboard IO Socket
- 5 Year Limited Warranty
- Made in Italy
- PILOTINO® CRMX PCB
- u.FL to Female SMA Coax Cable (10 cm)
- Dipole Tilt Swivel Antenna
-
SKU# Pilotino-PCBIntroduction This version of the PILOTINO® comes in a bare PCB format. This product is intended to be embedded into custom fixtures and lighting control systems in which component size is critical. Equipped with 6 mounting holes, the PILOTINO® PCB is ready to be installed with M2.5 x 5mm standoffs into any sort of enclosure. The output channel count is configurable, allowing the user to employ this state of the art LED decoder in channel modes of 1-5. This means it can be used with monochrome, RGB, RGBW, RGBA, and RGBWA type of LED strips. The DMX addressing is achieved with the on-board dip switches, or it can be configured through RDM. This standard has many useful tools to set up and diagnose issues in an installation by providing temperature readings, current and voltage meters and other useful instruments. One of the most important features of this product involves the on board 10 socket. This socket is meant to be used with the expansion modules to equip the PILOTINO® PCB with on board WiFi or CRMX capabilities. With the PILOTINO® CRMX PCB or PILOTINO® WiFi PCB, you instantly convert this decoder into a CRMX or Art-Net node receiving unit. This Allows for a completely wireless solution. You can also hard-wire a DMX cable into the connector ports for wired configurations, or use one main receiving unit with any of the wireless modules and daisy chain the rest of the decoders with DMX cables. Key Features:- Wireless Capability
- UL Recognized
- DMX Ready
- RDM Configurable
- RDM Data Feedback
- Onboard IO Socket (For Connectivity)
- Small Footprint
- Wire to Board Quick Connectors
- Standoff Mounting
- 5 Year Limited Warranty
- Made in Italy
-
SKU# DMX-CON3-C2This new edition of the DMX-CON3-C2 decoder has a frequency of 5.2 kHz which allows it to be used for video applications with no camera flickering. This LED Decoder provides you with the freedom to control 3 channels of LED strip, LED modules, and each channel provides you control from 1-256 levels of intensity. This decoder complies with DMX 512/1990 Protocol. Tech Specs: UL Class 2- DMX 512 LED Decoder
- 3 Output Channels
- 100W Max
- Input: 12-24V DC
- Output: To LED
- Flicker Free: 5.2 kHz
- Part Number: DMX-CON3-C2
- Class 2 circuit, isolated DMX input
- UL Listed (UL2108, E479339)
- Meets DMX512/1990
- 256-levels of brightness, full-color with decoder controls
- Can achieve asynchronous color changes effects
- Capable of controlling LED light with 1-3 colors
- Freely set the DMX address 1-512
- Modularizing can be matched with different LED modules
Main 281-324-0908 | 9AM - 6PM M-F (CDT)
SUBSCRIBE TO OUR NEWSLETTER
We take pride in designing LED strips right here in Houston, Texas, USA, and manufacturing a majority of them locally. Our commitment to American production supports the local industry and ensures high-quality products. God Bless America!
