Main 281-324-0908  |  9AM - 6PM M-F (CDT)
  • SKU# XLRJ45-XX
    XLRJ45-3F | RJ45 to 3-Pin XLR Female Adaptor One-piece RJ45 to 3-pin XLR Female Adaptor (Using ESTA standard pinout) XLRJ45-3M | RJ45 to 3-Pin XLR Male Adaptor One-piece RJ45 to 3-pin XLR Male Adaptor (Using ESTA standard pinout) XLRJ45-5F | RJ45 to 5-Pin XLR Female Adaptor One-piece RJ45 to 5-pin XLR Female Adaptor (Using ESTA standard pinout) XLRJ45-5M | RJ45 to 5-Pin XLR Male Adaptor One-piece RJ45 to 5-pin XLR Male Adaptor (Using ESTA standard pinout) Downloadable Documentation: SKU# XLRJ45-XX
  • SKU# XLR3-TERM XLR5-TERM
    DMXterminator XLR is an XLR connector plug with a 120 Ohm resistor inside connected to the data lines. Plug this in at the last DMX unit, and the DMX source perceives the cable as endless. Otherwise, reflections can be caused at the end of the line, creating problems that can be very difficult to find. Avoid this by terminating the end of the cable. FEATURES
    • A 120 Ohm DMX512 Terminator in an XLR connector
    • Two XLR versions available, male 3-pin or male 5-pin
    • Plug directly into any 3-pin or 5-pin XLR DMX512-controlled equipment
    • Use to avoid data signals being reflected from the end of the data cable
    • Very robust, rugged molded housing with non-slip grip
    • Product Weight (including packaging): 31g / 1.1oz
    • Gold-plated pins on the connector
    • Easy to use
    • Low cost
    • RoHS, REACH, and California Prop65 Certified
  • SKU# DMXCOMP
    DMXcompander RJ45 DMX Compander 3 DMX Universes Over 1 CAT5 Cable DMXcompander makes it possible to run three DMX512 Universes in one CAT-5 cable. A CAT-5 cable has four data pairs, one pair is used as the 0V reference and the other three pairs are used for DMX512 Data+ and Data-. Through the three RJ45 connectors on the DMXcompander, three DMX512 Universes are "COMpressed" into one CAT-5 cable through the Universe 1+2+3 RJ45 connector. At the other end of the CAT-5 cable, another DMXcompander can be used to "exPAND" the DMX512 Universes again, making them available through the three RJ45 connectors. Together with CAT-5 cables and CPOINT's XLR RJ45 adapters, a DMX512 network can be set up very quickly and at a very low cost Product Features
    • Three DMX512 Universes (1536 channels) combined into one CAT-5 cable
    • RJ45 connectors are used for connection with inexpensive CAT-5 cables
    • Gold-plated pins on RJ45 connectors
    • Sturdy molded housing
    • Mountable on DIN rail
    • Mountable in the lighting rig
    • Use as a flexible DMX outlet
    • Mountable with 5mm/0.2” screws or cable tie
    • Weight including packaging, 49g/1.73oz
    • EAN13 Barcode on the packaging
    • Lightweight packaging
    • Easy to use
    • RoHS, REACH, and California Prop65 Certified
    Downloadable Documentation: Fact Sheet CPOINT DMXcompander
  • SKU# DMXTENDER
    DMXtender A mountable sturdy CAT-5 cable extender DMXtender makes it possible to connect two CAT-5 cables together. The DMXtender can be mounted on a DIN rail, lighting rig, wall, etc. The sturdy design of the DMXtender makes it suitable for professional use. Together with the CPoint XLR-RJ45 adapter, a DMX512 network can be built very quickly and at a very low cost. With the CPoint DMXcompander, you can run 1536 channels in one CAT5 cable. Product Features
    • Use to connect two CAT-5 cables together to make a cable extension
    • Gold-plated pins on RJ45 connectors
    • Sturdy molded housing with non-slip grip
    • Mountable on a DIN rail, lighting rig, wall, etc.
    • Mountable with 5mm/0.2” screws or cable tie
    • Weight including packaging, 28.4g/1.00oz
    • EAN13 Barcode on the packaging
    • Lightweight packaging
    • Easy to use
    • RoHS, REACH, and California Prop65 Certified
    The DMXtender can be mounted in several different ways. Below are some suggestions for how the DMXtender can be mounted:
    • Wall Mount
    • Rail Mount
    • Rig Mount
    Downloadable Documentation: Fact Sheet CPOINT DMXtender
Go to Top