Pharos Switch 4-Port PoE Network Expansion
Pharos Switch - Front view

PAC-S

Pharos Switch 4-Port PoE Network Expansion

Pharos

The Pharos Switch offers an unmanaged Ethernet solution designed to simplify power delivery and networking for up to four Power-over-Ethernet (PoE) devices. It provides an efficient method to link and power PoE controllers, expansion modules, and user interfaces, featuring a non-powered pass-through port to connect directly to a configuration PC or existing local network.

Engineered for DIN-rail mounting, this PoE switch operates on a single 24V DC power input and integrates seamlessly with both Pharos Express and Pharos Designer hardware platforms.

  • PAC S: Pharos Switch (Unmanaged PoE Ethernet switch with 4 Port, Class 2 PoE, 24V DC)

Downloadable Documentations
Pharos Switch Datasheet
Installation Instructions

Categories: Tags: , , , ,

PoE Convenience

Integrate operational power and network data into a single cabling run using standard PoE technology (IEEE 802.3af), simplifying equipment placement across your installation without requiring local outlets.

Installer Friendly

Built for fixed infrastructure, featuring technician-friendly 5.08mm (0.200″) plug-in rising-clamp terminal blocks running on a standard 24V DC power input. Includes RJ45 jacks along with flexible DIN-rail and keyhole mounting setups.

No Commissioning Required

Functions straight out of the box as an unmanaged network switch, eliminating software setup or manual configuration steps.

Flexible Power Delivery

Autosensing capabilities identify the exact power requirements of each connected device, supplying the appropriate power allocation automatically.

Protected Outputs

Integrated resettable fuses safeguard every port, delivering tailored overcurrent protection matched to the PoE device Class detected.

Multiple Ports

Offers four dedicated ports to power and network Pharos PoE controllers, remote expansion modules, and touchscreen panels (or any IEEE 802.3af compliant equipment). A fifth non-PoE port connects directly to programming laptops or wider local area networks.

Reliability

Engineered for continuous 24/7 operation in permanent architectural and entertainment lighting setups.

  

Interfaces
PoE: Four RJ45 sockets for 10/100Base-TX Ethernet with Power-over- Ethernet (10W max on each port)
Supports IEEE 802.3af Type 1- Class 1, 2 and 0 (up to 10W) devices		 Ethernet: RJ45 socket for 10/100Base-TX Ethernet
* Install-friendly 0.200″ (5.08mm) plug in rising clamp connectors (included)
  

Specifications
Power: 24V DC *, power consumption dependent on load (45W maximum) Temperature: 0°C to 50°C (32°F to 122°F)
Humidity: 10-90% relative, non-condensing Ingress: IP40
Physical: 6 unit wide DIN rail mounting enclosure (35/7.5 rail)
10.8 x 9 x 4 cm (4.2 x 3.5 x 1.6 in)
0.3 kg (0.7 lbs)		 Shipping: 19.5 x 15 x 7.5 cm (8 x 6 x 3 in), 0.4 kg (0.9 lbs)
* Install-friendly 0.200″ (5.08mm) plug in rising clamp connectors (included)
  

Warranty and Certifications
Warranty: 5 year Certifications: CE compliant, UKCA compliant, UL/cUL listed.
  

Reviews

There are no reviews yet.

Be the first to review “Pharos Switch 4-Port PoE Network Expansion”