-
SKU# IA-HARD-001011MADRIX® USB contact closure This digital input device registers if its circuit is either open or closed. In most cases, it is used to build a switch or trigger. The small unit can simply be connected to any USB 2.0 port. Incoming values are directly translated into DMX data in MADRIX®. Example of use: Strobe or Blackout. SKU# IA-HARD-001011 -
SKU# AD-PRO-6Tech Specs:- Signal Input: Ethernet ArtNet Protocol
- Signal Output: DMX 512 Protocol
- Power Supply: DC 12V/1.25
- Supply Current: 350mA
- Input Supply Voltage: 7V-24V
- Part Number: AD-PRO-6
- Ethernet protocol ArNet III Input.
- DMX 512 Protocol Output.
- Capable of controlling up to 6 DMX Universes ( 3072 Channels).
- Ergonomic Enclosure made with high quality ABS material.
- Web Server available for easy configuration and setup.
- DMX lines have overload protection.
- Includes 12V Power Supply, Breakout Cable for 6 Universes (DB15 to 6 XLR Connectors) and Heavy Duty CAT5 RJ45 to RJ45.
- AD-PRO-6 Data Sheet
- AD-PRO-6 Quick Configuration Guide
- AD-PRO-6 Custom Configuration Guide
- AD-PRO-6 Breakout Cable Pinout
-
-
SKU# NAC3MPBChassis connector, power-out, 3/16'' flat tab terminals, grey The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. Attention: The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under load or live! Features & Benefits- Locking 20 A / 250 V ac appliance coupler
- 3 contacts for line, neutral and premating safety ground
- Power-in (blue) and power-out (grey) versions with different keying to avoid the possibility of intermating
- Fast and easy twist lock latching system
- Extremely robust and reliable
- Ergonomic design
- User friendly latch design for easy handling
- UL, cUL recognized components VDE certified SEV approved
- Branded with unique hologram - guarantees genuine and authentic Neutrik product
-
SKU# NAC3MPAChassis connector, power-in, 3/16'' flat tab terminals, blue The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. Attention: The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under load or live! Features & Benefits- Locking 20 A / 250 V ac appliance coupler
- 3 contacts for line, neutral and premating safety ground
- Power-in (blue) and power-out (grey) versions with different keying to avoid the possibility of intermating
- Fast and easy twist lock latching system
- Extremely robust and reliable
- Ergonomic design
- User friendly latch design for easy handling
- UL, cUL recognized components
- VDE certified
- SEV approved
- Branded with unique hologram - guarantees genuine and authentic Neutrik product
-
SKU# NAC3FCBLockable cable connector, power-out, screw terminals, grey The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. Attention: The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under load or live! Features & Benefits- Locking 20 A / 250 V ac appliance coupler
- 3 contacts for line, neutral and premating safety ground
- Power-in (blue) and power-out (grey) versions with different keying to avoid the possibility of intermating
- Fast and easy twist lock latching system
- Extremely robust and reliable
- Ergonomic design
- User friendly latch design for easy handling
- Unique Neutrik chuck type strain relief
- UL, cUL recognized components
- VDE certified
- SEV approved
- Branded with unique hologram - guarantees genuine and authentic Neutrik product
Note: Item comes disassembled SKU# NAC3FCB -
SKU# NAC3FCALockable cable connector, power-in, screw terminals, blue The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. Attention: The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under load or live! Features & Benefits- Locking 20 A / 250 V ac appliance coupler
- 3 contacts for line, neutral and premating safety ground
- Power-in (blue) and power-out (grey) versions with different keying to avoid the possibility of intermating
- Fast and easy twist lock latching system
- Extremely robust and reliable
- Ergonomic design
- User friendly latch design for easy handling
- Unique Neutrik chuck type strain relief
- UL, cUL recognized components
- VDE certified
- SEV approved
- Branded with unique hologram - guarantees genuine and authentic Neutrik product
Note: Item comes disassembled
Quick Links:
SKU# NAC3FCA -
SKU# POCKET-CONSOLEBasic-Pocket-Console SKU: Basic-Pocket-Console The Pocket Console® is the inexpensive source for the smallest, most graphic “hands-on” and “user-friendly” DMX-512 theatrical lighting console made. A user-friendly, portable and lightweight lighting console. Playback-8-Pocket-Console SKU: Playback-8-Pocket-Console The Pocket Console® with 8 fully recordable submasters in the new PLAYBACK-8™ software. In this version, THE POCKET CONSOLE® DMX PLAYBACK-8, it is not just a single scene playback anymore, but is now a recording console. Completely portable and lightweight lighting console. Pelican™ Hard Case not included. dmXact-Pocket-Console SKU: dmXact-Pocket-Console Allows real-time output in DMX 0-255, DMX% 0-100 and binHex 00-FF readout of faders. EXCELLENT test tool giving precise output data. Completely portable and lightweight lighting console. MultiPatch-Pocket-Console SKU: MultiPatch-Pocket-Console The Pocket Console® with 8-Page Patch (Moving Light and Ballroom Multi-Patch) allows EIGHT discreet pages of patch configurations! 24-Eight-Pocket-Console SKU: 24-Eight-Pocket-Console The Pocket Console® 24-Eight is a 24 Channel, 8 Submaster, single DMX universe console. The console allows up to 512 DMX addresses to be patched through 24 channels across three banks of 8 faders. Channel Bank assignment can be easily managed as necessary during your operations to give you access to all 24 channels. In addition to the Channel Mode, the Pocket Console® 24-Eight offers multiple features, including a Patch Mode, Playback Mode and Record Mode, to make this an all-round lighting console. Features:- Optional Pelican Cases are available
- small, lightweight, portable and designed to be hand held
- Levels are set using eight faders (slider pots)
- Each FADER has an associated bump button
- 512 dimmer addresses are patchable to any of the eight faders
- The faders are patchable using from 0 to 512 dimmer addresses per fader
- The unit is powered by a 9v battery OR by a 120v AC power supply
- 9 Volt Alkaline Battery Life – 3 hours minimum
- 120v AC adapter
- Number of DMX dimmer addresses supported – 512
- Number of Faders – 8 with bump buttons
- Data output – DMX-512 1990 standard
- Data Speed: 44hz
- Comes with instructions & 90 day warranty
- Basic Pocket Console User Manual
- Playback 8 Pocket Console User Manual
- dmXact Pocket Console User Manual
- MultiPatch Pocket Console User Manual
- 24-Eight Pocket Console User Manual
-
SKU# DMX-RJ45-SPLITTERThe IT-SP8R is an ultra-compact 8 Port RJ45 DMX512 Splitter for use with DMX installations wired with Category 5 (CAT5) cabling. Each output port of the IT-SP8R is an independently protected DMX signal that can be run up to 1,500 feet (500 meters). Since DMX signals cannot be wired in a star network configuration without being re-created by an active splitter, use the IT‑SP8R to branch DMX signals out to DMX devices in multiple locations or to extend the 1,500 foot (500m) maximum distance from the DMX source.The IT-SP8R includes DMX Input and Pass-Thru ports with a handy line termination switch. It also includes a polarity inversion switch that allows the IT-SP8R to internally convert between DMX512 standard wiring and inverted wiring used by Color Kinetics® devices. IT-SP8R| North American DMX 8-Way RJ45 Splitter Includes North American power supply IT-SP8R-AUST| Australian DMX 8-Way RJ45 Splitter Includes Australian power supply IT-SP8R-EURO|UK/Euro DMX 8-Way RJ45 Splitter Includes UK/EURO power supplyFeatures:
- RJ45 Ports for easy connection in DMX systems that use Category 5 cables
- DMX Input and DMX Pass-Thru Ports for daisy-chaining multiple splitters
- 8 Independently generated and protected output ports
- Each port can drive a DMX line an additional 1,500 feet (500 meters)
- Port protection circuitry includes Transient Voltage Suppression (TVS) and Self-Resetting Poly-Switch Fuses to prevent a fault on one port from affecting the Input or other output ports
- Can be used in systems wired for DMX512 or Color Kinetics® devices
- User-selectable polarity inversion for converting between DMX512 and Color Kinetics® wiring schemes
- User-selectable input line termination switch
- Ultra-compact design provides 8 DMX ports just 14in2 (90cm2)
Configuration:
The IT-SP8R has two user-selectable configuration switches.
Termination:The DMX standard recommends that the last device in a DMX chain be properly terminated. If the IT-SP8R is the last DMX device on the DMX network coming from the Lighting Controller, the DMX Termination Switch should be ON.
Polarity:
There are two primary wiring schemes used for DMX data being carried on CAT5 cabling -- the “standard” DMX wiring, and a different scheme used by Color Kinetics® products. The IT-SP8R has a switch that can be used to invert the polarity of the data from the Input port to the 8 Output ports. If DMX wiring is used on both the input and outputs, or if CK wiring is used on both the input and outputs, then the Polarity switch should be set to Normal. If the wiring on the Input side of the IT-SP8R is the opposite (DMX-to-CK or CK-to-DMX), then the Polarity switch should be set to Invert.
CAT5 DMX Wiring:
The following chart shows the standard DMX512 usage of each conductor on a CAT5 cable, plus how Color Kinetics® products are wired, and how the IT-SP8R is internally wired in order to accommodate both types of wiring.
When the Polarity switch is set to "Normal", the Data +/- signals are passed to the output ports unchanged (as shown in the chart). When the Polarity switch it set to "Invert", the Data +/- signals are reversed when passed to the output ports to effectively convert from the DMX wiring style to Color Kinetics® or vice-versa.
Quick Links: SKU# DMX-RJ45-SPLITTER
-
SKU# SCENESTATION-3SceneStation sets a new standard for full-featured, easy to use, cost-effective DMX lighting control. SceneStation is entirely self-contained in a single gang, wall-switch sized unit. Perfect for restaurants, high-end residential, trade show booths, and more, SceneStation can control nearly any DMX device (RGB fixtures, moving lights, dimmers, effects, etc.), while also remaining very simple for the end user. SS-305 | Architectural SceneStation 3 Includes SceneStation (with a Built-in Effects Engine for creating dynamic scenes), flushplate Unit, pluggable wiring block and mounting hardware. Meant to be wall-mounted. SS-310 | Portable SceneStation 3 Includes SceneStation (with a Built-in Effects Engine for creating dynamic scenes) in a portable enclosure with 5-Pin XLR jacks and power supply (AC-12). Alternate power supply options are available for this product. If you would like to order this product with an Australian Plug Set or a UK/European Plug Set, please include that request on the "Order Notes" section at checkout. SS-315 | Portable SceneStation 3 Kit Includes SceneStation in a portable enclosure with 5-Pin XLR jacks, power supply (AC-12), SceneStation User's Remote and USB StationLink Adaptor, all enclosed in a protective carrying case. Alternate power supply options are available for this product. If you would like to order this product with an Australian Plug Set or a UK/European Plug Set, please include that request on the "Order Notes" section at checkout. Key Features- Completely Self-Contained
- 64 Scene Capacity
- Static, Sequential, Toggle, Chase, Momentary & Pile-On Modes for Each Button
- Built-in Effects Engine for creating dynamic scenes
- Programmable RGB Backlit Buttons
- Includes 2.4GHz Wireless SceneStation Module
- DMX-512 Output (44Hz)
- DMX Input Snapshot and/or Manual Channel Editing
- IR Remote Setup and Operation
- Optional "Power-On" Scene Selection
- AC or DC Operation
-
SKU# SS-USB-STICKFor use with SceneStation Studio software for Mac or Windows computers. The SceneStation USB Stick is used on your Mac or PC computer with the free SceneStation Studio software to remotely manage, control and program one or more wireless SceneStations. The adaptor provides the 2.4GHz communication link between the computer and the SceneStation Network. All wireless SceneStations can be protected by a Security PIN to allow only authorized users to be able to control or edit a station. SS-USB-STICK | USB Stick Wireless USB adaptor for use with SceneStation Studio and your Mac or PC. -
SKU# CS-NET-HUBSThe CueStation Universal Network Hub is a multi-purpose interface for controlling button stations that use either 2-Wire or 4-Wire network technologies. The Hub acts as both a power supply for the stations as well as a gateway for allowing host systems to receive button events and instruct the button indicators to illuminate in various ways. The Network Hub is not used with Passive stations. The Network Hub communicates with the host system by RS-232 messages and/or Ethernet messages. Note: Alternate power supply options are available for this product. If you would like to order this product with an Australian Plug Set or a UK/European Plug Set, please include that request on the "Order Notes" section at checkout. ST-HUB | Universal Hub For controlling both 2-Wire and 5-Wire CueStations via RS-232, includes switching power supply ST-HUB-EN | Universal Hub w/ Ethernet For Controlling both 2-Wire and 5-Wire CueStations via RS-232 and/or Ethernet, includes switching power supply ST-HUBD | Universal Hub DIN For Controlling both 2-Wire and 5-Wire CueStations via RS232, DIN-Rail Mounted, no power supply included ST-HUBD-EN | Universal Hub DIN w/Ethernet For controlling both 2-Wire and 5-Wire CueStations via RS232 and/or Ethernet, DIN-Rail Mounted, no power supply included Key Features- Controls both 2-Wire and 5-Wire CueStations
- Communicates with the host system via RS-232 and/or Ethernet
- Powered by 12-24V AC or DC
- Removable terminal blocks
- Small size
- CueStation Universal Network Hub
- Power Supply
- Mounting Flanges
- Instructions
Main 281-324-0908 | 9AM - 6PM M-F (CDT)
We take pride in designing LED strips right here in Houston, Texas, USA, and manufacturing a majority of them locally. Our commitment to American production supports the local industry and ensures high-quality products. God Bless America!
