- ETL/cETL/CE certified
- Optical isolation prevents signal disturbances
- Isolation between input and outputs as well as full isolation between each output
- Simplify connections and reduce installation and cable cost
- Easy detection of disturbances by intelligent DMX protocol supervisor
- Clean and clear amplification of DMX signals
- DMX line can be terminated by pressing a button
- Extend DMX lines infinitely with the splitter
- Strong Power Supply worldwide 5VAC - 276VAC
- Input (1 universe) 1pcs
- Through (1 universe) 1pcs
- Outputs 5 pcs
- Box version, M10 thread for a clamp and an eye bolt for safety line
- Dimensions Rack: 19", 1 Unit, 111 mm, Box: 220x111x44mm
- 2 Year warranty
-
SKU# XSP-OPTO-SPLITTER-5The DMX Opto-Splitter Terminal is equipped with seven terminal ports which allow the user to directly hardwire into a DMX device for permanent fixtures. With the terminal connectors, the user will save money by not having to purchase additional standard connectors. The DMX Opto-Splitter Terminals make it possible to connect directly into the hardware. SWISSON-XSP-5B5-W-US: The DMX Splitter Terminal Box with Wall Mount comes in a compact box configuration with a wall mount and is equipped with 1 input terminal, 1 through terminal, and 5 output terminals. SWISSON-TR5-US: The DMX Splitter Terminal Single Rack has 1 input terminal, 1 through terminal, 5 output terminals and includes mounting flanges for a rack. SWISSON-XSP-TR5-TR5-US: The DMX Splitter Terminal Double has 2 input terminals, 2 through terminals, 10 output terminals and is rack mountable with the included flanges. The DMX Splitter Terminal Double Rack is essentially two single racks side by side.
-
SKU# XSP-OPTO-SPLITTERThe Swisson DMX Opto-Splitter 5 Pin XLR In & Thru - 3 Pin XLR Out, perfect for a user looking to connect another DMX input, without wasting an additional output on the splitter. SWISSON-XSP-5B5-US: The DMX Opto-Splitter 5 Pin XLR In & Thru - 3 Pin XLR Out Box is a compact box structure with one 5 Pin XLR input, one 5 Pin XLR through, and five 3 Pin XLR outputs SWISSON-XSP-5R5-US: The DMX Opto-Splitter 5 Pin XLR In & Thru - 3 Pin XLR Out Single Rack is a rack mountable Opto-Splitter equipped with flanges on both ends, one 5 Pin XLR input, one 5 Pin XLR through, and five 3 Pin XLR outputs SWISSON:XSP-5R5-5R5-US: The DMX Opto-Splitter 5 Pin XLR In & Thru - 3 Pin XLR Out Double Rack is capable of being mounted with the included flanges, equipped with two 5 Pin XLR inputs, two 5 Pin XLR through ports, and ten 3 Pin XLR outputs
- ETL/cETL/CE certified
- Optical isolation prevents signal disturbances
- Isolation between input and outputs as well as full isolation between each output
- Simplify connections and reduce installation and cable cost
- Easy detection of disturbances by intelligent DMX protocol supervisor
- Clean and clear amplification of DMX signals
- DMX line can be terminated by pressing a button
- Extend DMX lines infinitely with the splitter
- Strong Power Supply worldwide 5VAC - 276VAC
- Input (1 universe) 1pcs
- Through (1 universe) 1pcs
- Outputs 5 pcs
- Box version, M10 thread for a clamp and an eye bolt for safety line
- Dimensions Rack: 19", 1 Unit, 111 mm, Box: 220x111x44mm
- 2 Year warranty
-
SKU# XMG-51The DMX Merger XMG-51 is a 5 input, one merge output, 5 pin XLR system that merges 5 DMX lines together into one. The XMG-51 DMX Merger combines up to five DMX lines together into one. This allows multiple DMX lighting control systems are used simultaneously on a single light installation. The DMX data is merged together according from simple to complex combination that you can configure. The operating modes and rules can be combined. This allows for a variety of possibilities of operation: Multiple lighting controllers can share one of the 512 DMX channels. For example, controller A controls the channels 1-48, controller B controls the channel 50-74 and the channels 200-400 are controlled by controller C. Several light controllers can operate on the same channels. For example, a single Lamp can be controlled by all controllers at the same time. Which controller has priority is configurable (HTP, LTP). A mobile lighting controller could be plugged in different places of the venue. The merger recognizes where the controller is plugged in and switches automatically the corresponding port to the output. A backup lighting controller can be used at the same time as the main lighting controller by using the XMG-51Merger. The merger will automatically switch to the backup controller in the case of a failure of the main controller. It can also be switched manually at any time. The XMG-51 has a built in bypass relay which connects the output with a dedicated input in event of a power supply failure.
- 5 DMX512 inputs
- 1 DMX512 output
- Only 50us latency
- Bypass relay
- Manual switch
- HTP, LTP channel, LTP line Modes
- Channel offset for each input
- Connect up to 5 lighting desks into one DMX-512 line
- Fast uplink port with only 0.00005 second delay
- Manual access
- Channel offset for each port
- Switch mode for backup
- HTP merge mode (Highest Takes Precedence)
- LTP merge mode (Last Takes Precedence)
- HTP or LTP for each channel
- Overwrite by priority
- Optical isolated
- Works on worldwide power supplies, 85V up to 267V