Main 281-324-0908  |  9AM - 6PM M-F (CDT)
  • SKU# XMG-51
    The DMX Merger XMG-51 is a 5 input, one merge output, 5 pin XLR system that merges 5 DMX lines together into one. The XMG-51 DMX Merger combines up to five DMX lines together into one. This allows multiple DMX lighting control systems are used simultaneously on a single light installation. The DMX data is merged together according from simple to complex combination that you can configure. The operating modes and rules can be combined. This allows for a variety of possibilities of operation: Multiple lighting controllers can share one of the 512 DMX channels. For example, controller A controls the channels 1-48, controller B controls the channel 50-74 and the channels 200-400 are controlled by controller C. Several light controllers can operate on the same channels. For example, a single Lamp can be controlled by all controllers at the same time. Which controller has priority is configurable (HTP, LTP). A mobile lighting controller could be plugged in different places of the venue. The merger recognizes where the controller is plugged in and switches automatically the corresponding port to the output. A backup lighting controller can be used at the same time as the main lighting controller by using the XMG-51Merger. The merger will automatically switch to the backup controller in the case of a failure of the main controller. It can also be switched manually at any time. The XMG-51 has a built in bypass relay which connects the output with a dedicated input in event of a power supply failure.
    • 5 DMX512 inputs
    • 1 DMX512 output
    • Only 50us latency
    • Bypass relay
    • Manual switch
    • HTP, LTP channel, LTP line Modes
    • Channel offset for each input
    • Connect up to 5 lighting desks into one DMX-512 line
    • Fast uplink port with only 0.00005 second delay
    • Manual access
    • Channel offset for each port
    • Switch mode for backup
    • HTP merge mode (Highest Takes Precedence)
    • LTP merge mode (Last Takes Precedence)
    • HTP or LTP for each channel
    • Overwrite by priority
    • Optical isolated
    • Works on worldwide power supplies, 85V up to 267V
    Quick Links: SKU# XMG-51
  • SKU# XRC-CT15b
    15 inputs for dry contacts allows for a customized integration of triggers for the XRC-200.
    • Remote control of the XRC-200
    • Connection through a RJ45 cable (not included)
    • Powered by the XRC-200
    • 15 contacts
    • GND and VCC
    • LED connection control
    Quick Links: SKU# XRC-CT15b
Go to Top