-
SKU# 70304DMX USB Pro is the Industry standard DMX USB Interface for DMX/RDM. Control your lights from PC or Mac programs The first choice of lighting professionals Products don’t become an industry standard for no reason. Used on a daily basis by countless lighting designers and installers across the world, the DMX USB converter has proven for many years that it’s a reliable and robust product that excels at so many fundamental applications. It allows for USB 2.0 support through its USB-B connection to send or receive a physical DMX512 signal from PCs, Macs and Linux devices running through a vast array of third-party software that supports our DMX USB Pro software API. This DMX USB converter features an internal frame buffer for consistently generating DMX frames when outputting, ensuring a reliable flow of data and always giving you a stable data stream, regardless of your PC’s workload. Downloadable Documentation: -
SKU# DMXN20-3LHigh Quality hand made cable. Material Used: 1 Neutrik NC3MXX 1 Neutrik NC3FXX 20 Feet VTG Audio Low Noise Microphone Cable MADE IN USA SKU# DMXN20-3L -
SKU# DMXN01High Quality hand made cable. Invert polarity from pin 2 to pin 3. -
-
SKU# SN8-IJISCOMMERCIAL STAGE CABLE PRICE IS PER FOOT 8 Pair w/shield, 24 AWG Snake cable, Black, Per Ft NOTE: PLEASE CONTACT US FOR ROLLS SPECIAL PRICE -
SKU# LO-Z5PRICE IS PER FOOT High performance mic cable 20 gauge conductors with braided shield, Black, Per Ft Applications:- Heavy Duty Microphone Cable
- Signal Cable
- DMX
-
Out of stock
SKU# 70572Quick Links: -
SKU# IA-HW-001001Important Links:The USB ONE allows you to control 512 DMX channels via Madrix software.
- DMX-IN/OUT with 5-pin NEUTRIK XLR Port: This device allows you to send or receive data via MADRIX using 512 DMX channels. A gender changer with 5-pin male to 3-pin or 5-pin male is required for DMX-IN.
- USB 2.0 Standard: The latest USB 2.0 standard is fully supported to allow for a higher maximum speed of 480Mbit/s.
- Power Over USB: The interface is powered directly via the USB port and does not need an additional power supply.
- Hot Swapping & Plug and Play: Devices can be connected to and disconnected from the computer during use and without a reboot.
- Remote Control: MADRIX can be controlled remotely using the built-in DMX-IN functions.
- Frame Rate Stability: Up to 60 devices can be connected to a single USB host controller without having any frame rate problems (60 DMX512 interfaces amount to 30,720 DMX channels).
- Active USB: Must be connected to an active USB 2.0 hub with a power supply.
-
Out of stock
SKU# DMX-TEST-01Free Ground Shipping.The simple inexpensive DMX Tester and Terminator will allow users to see if a device is properly sending or receiving a DMX Signal. Also, it will work as a Terminator and prevents the fast DMX signal from bouncing back down the line and causing flicker and other problems. It is safe to leave this product connected all the time.
How it Works
- Orange/Yellow LED: A orange/yellow LED indicates a good DMX signal.
- Red LED: if you see red only then you have DMX signal problem such as inverse polarity.
- No LED: If the LED is off then you have pin 2 or 3 cut off.
High Quality Material
- Bicolor LED Diode
- Genuine Neutrik XLR Male 3 Pin
- 120 ohms, 2 W Resistor Non-Flammable
Warranty: 1 Year
SKU# DMX-TEST-01 -
Out of stock
SKU# DMX-TEST-02Free Ground Shipping.The simple un-expensive DMX Tester and Terminator will allow users to see if a device is properly sending or receiving a DMX Signal. Also will work as a Terminator and prevents the fast DMX signal from bouncing back down the line and causing flicker and other problems. It is safe to leave this product connected all the time.
How it Works:- Orange/Yellow LED: A orange/yellow LED indicates a good DMX signal.
- Red LED: If you see red only then you have DMX signal problem such as inverse polarity.
- No LED: If the LED is off then you have pin 2 or 3 cut off.
High Quality Material
- Bicolor LED Diode
- Genuine Neutrik XLR Male 3 Pin
- DMX Adapter 3 Pole Female to 5 Pole Male 70029
- 120 ohms, 2 W Resistor Non-Flammable
Warranty: 1 Year
SKU# DMX-TEST-02 -
Out of stock
SKU# 70314The Enttec Pro2 (Pro Mk2) DMX USB PRO is light-weight, portable, and ready for professional applications. The Pro2 supports two full universes of DMX512, it can be used as an output to control lights, or as input. Fully backward-compatible with all software titles that support DMX USB PRO- Dual, fully independent, DMX ports each with full RDM capability
- MIDI input and output ports
- Standalone operation for unattended replay of lighting shows (limit 1 universe)
- One firmware version supports all features
- Aesthetically slim-profile, machined aluminium box
- True 1500V isolation separating all DMX ports from each other (protect your computer and each data line from surges)
- Internal frame buffering (preserve data integrity when computer is busy)
- Works at various communication speeds
- Utilizes the FTDI chipset, (compatible with Windows, OSX, Linux etc.)
- Stores configuration and user data in EEPROM
- Refresh rate configurable from 1 to 40Hz
- Break time configurable from 96uS to 1.3mS
- MaB time configurable from 10.6uS to 1.3mS
- Upgradeable firmware
- Security / software protection API
- Comes with USB and break out cables
- USB Cable
- Break Out Cable (79146 - DB15 to 3DMX)
Main 281-324-0908 | 9AM - 6PM M-F (CDT)
SUBSCRIBE TO OUR NEWSLETTER
We take pride in designing LED strips right here in Houston, Texas, USA, and manufacturing a majority of them locally. Our commitment to American production supports the local industry and ensures high-quality products. God Bless America!
