-
Out of stock
SKU# DMX-ADD-MODThe DMX Address Module is used to set the starting address of our Direct DMX RGB LED tape lighting. This module allows the user to manually set starting addresses of segments where the automatic addressing of 001 is unwanted. This module requires a 5VDC power supply which can be obtained from a parallel connection to the tape lightings power supply. Simply connect the main DMX input to the “IN” AND THE “OUT” GOES STRAIGHT TO THE led Pixel Strip XLR 5-Pin DMX input. For every new readdressed starting point, you will need to make sure to add a 5-pin XLR Harness and DMX Filter Module to you new segment runs. Video(s): Downloadable Documentation: DMX Address Module Datasheet Compatible Strip(s): Direct DMX RGB LED Tape Lighting Accessories: 5-Pin XLR Harness, DMX Filter Module -
SKU# LED-CAB-PWR2 Pin red-black connectors Male or Female, 20AWG, 12 in wire length LED-CAB-2M-PWR: Male LED-CAB-2F-PWR: Female Quick Links: SKU# LED-CAB-PWR -
SKU# LED-CAB-RGB4 Pin RGB black-blue-red-green connectors Male or Female, 22 awg, 12 in wire length LED-CAB-4M-RGB: Male LED-CAB-4F-RGB: Female Quick Links: SKU# LED-CAB-RGB -
SKU# LED-CAB-RGBW5 Pin RGBW black-green-red-blue-white connectors Male or Female, 20 awg, 12 in wire length LED-CAB-5M-RGBW: Male LED-CAB-5F-RGBW: Female Quick Links: SKU# LED-CAB-RGBW -
SKU# LED-CAB-WP-2LED Strip 20 AWG Waterproof Connector With Lead 2 Pin Male or Female, 1 Meter is 3.25ft, for NON-RGB LED Strips. LED-CAB-2M-WP: Male LED-CAB-2F-WP: Female SKU# LED-CAB-WP-2 -
SKU# LED-CAB-4RGB LED Strip 20 AWG Waterproof Connector With Lead 4 Pin Male or Female, 1 Meter is 3.25ft, for RGB LED Strips, non waterproof IP40, waterproof IP67, Submersible Ip68. LED-CAB-4M-WP: Male LED-CAB-4F-WP: Female SKU# LED-CAB-4 -
SKU# ECXXX-PK10Overview: Complete your waterproof LED tape (strip) lighting applications with waterproof endcaps for your leads and tales. These standard endcaps are useable for tape lighting with 10mm and 12 mm width flexible PCBs with options for with or without holes. Solid endcaps can be used to terminate ends where “no” protruding wires will be present. Endcaps with holes can be used where protruding wires “will” be present for lead wires used to run power and/or data signal. All endcaps will require a silicone sealant to bond and secure cappings into place. Applications: For use with IP67 (silicone sleeved) or IP68 (silicone extruded/injected) tape lighting. Accessories: Clear RTV Silicone Sealant #LED-RTV-SIL Silicone Bracket #5050-sb-kit ** End Cap with Holes may require slight modification in order to accommodate various LED strip wire configurations. Package Contains 10 End Caps End Caps Datasheet SKU# ECXXX-PK10 -
SKU# 5050-sb-kitThe Silicone Bracket Kit includes 15 brackets and 30 screws. Used to securely install your 5050 IP67 or IP68 strips. SKU# 5050-SB-KIT -
SKU# LED-RTV-SILOverview: Reseal your waterproof LED Strips with this clear silicone sealant. This non-toxic, non-polluting sealant is great for electronic components. This product works at room temperature with metal and non metal materials. It is also excellent when used as a form of electrical insulation/resistance, aging resistance, and moisture proofing. This product is tested to work with all SIRS-E Waterproof strips and Waterproof End Caps. Applications: Used for bonding, sealing, or insulating of:- Electronics
- Semiconductor materials
- Electrical equipment
- Magnetic tile
- Optical instruments
-
SKU# AD-PRO-6Tech Specs:- Signal Input: Ethernet ArtNet Protocol
- Signal Output: DMX 512 Protocol
- Power Supply: DC 12V/1.25
- Supply Current: 350mA
- Input Supply Voltage: 7V-24V
- Part Number: AD-PRO-6
- Ethernet protocol ArNet III Input.
- DMX 512 Protocol Output.
- Capable of controlling up to 6 DMX Universes ( 3072 Channels).
- Ergonomic Enclosure made with high quality ABS material.
- Web Server available for easy configuration and setup.
- DMX lines have overload protection.
- Includes 12V Power Supply, Breakout Cable for 6 Universes (DB15 to 6 XLR Connectors) and Heavy Duty CAT5 RJ45 to RJ45.
- AD-PRO-6 Data Sheet
- AD-PRO-6 Quick Configuration Guide
- AD-PRO-6 Custom Configuration Guide
- AD-PRO-6 Breakout Cable Pinout
-
SKU# AD-PRO-6-BKTech Specs:- 1 - DB-15 Male Connector
- 6 - 5 Pin XLR Female Neutrik Connectors
- Length: 19"
- Color: Black (white XLR cable segments)
- Made with High Quality Horizon Cable
- Made with High Quality Neutrik Connectors
- Complies with DMX512 USITT standards
- Made in the USA.
-
SKU# AD-PRO-6-PSTech Specs:- 1 -Type A Electrical Male Plug
- 1 -2.5MM sealed IP68 Power Plug
- Input: AC 120V
- Output: DC 12V
- Current: 1.25A
- Length: 68"
- Color: Black (White XLR Cable)
- Made with High Quality Switchcraft Components
- Assembled in the USA.
Main 281-324-0908 | 9AM - 6PM M-F (CDT)
We take pride in designing LED strips right here in Houston, Texas, USA, and manufacturing a majority of them locally. Our commitment to American production supports the local industry and ensures high-quality products. God Bless America!
