- RGBW LED Strip Wire
- 20 AWG RGBW 5 Wire Conductors Cable
- Hook-up Wire Black, Green, Red, Blue, White
- For RGBW (RGB + White, RGB + Cold White, RGB Warm White ), RGBA (RGB + Amber) or any 4 Colors LED Strips.
-
SKU# LED-TUB-XX3M™ Heat Shrink Tubing offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications. Rated for 135°C continuous operation, all tubing is split resistant, mechanically tough, easily marked and resists cold flow. Typically used as a shrink-fit electrical insulation over cable splices and terminations. Great for use with 5050 LED Strip leads. It is also used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire-resistant covering. Please Note: This item is sold Per Feet SKU# LED-TUB-XX
-
SKU# StripLockStripLockTM wire lead connectors are used for going around corners or, when cut in half, to create two power leads or jumper cables to bridge gaps in order to get LED lighting to other areas. StripLockTM splice connectors are used to join two strips, creating a continous run of LED lighting.
-
SKU# LED-RTV-SILOverview: Reseal your waterproof LED Strips with this clear silicone sealant. This non-toxic, non-polluting sealant is great for electronic components. This product works at room temperature with metal and non metal materials. It is also excellent when used as a form of electrical insulation/resistance, aging resistance, and moisture proofing. This product is tested to work with all SIRS-E Waterproof strips and Waterproof End Caps. Applications: Used for bonding, sealing, or insulating of:
- Electronics
- Semiconductor materials
- Electrical equipment
- Magnetic tile
- Optical instruments
-
SKU# ECXXX-PK10Overview: Complete your waterproof LED tape (strip) lighting applications with waterproof endcaps for your leads and tales. These standard endcaps are useable for tape lighting with 10mm and 12 mm width flexible PCBs with options for with or without holes. Solid endcaps can be used to terminate ends where “no” protruding wires will be present. Endcaps with holes can be used where protruding wires “will” be present for lead wires used to run power and/or data signal. All endcaps will require a silicone sealant to bond and secure cappings into place. Applications: For use with IP67 (silicone sleeved) or IP68 (silicone extruded/injected) tape lighting. Accessories: Clear RTV Silicone Sealant #LED-RTV-SIL Silicone Bracket #5050-sb-kit ** End Cap with Holes may require slight modification in order to accommodate various LED strip wire configurations. Package Contains 10 End Caps End Caps Datasheet SKU# ECXXX-PK10
-
SKU# 5050-CON-C5W
- 5050 RGBW LED Strip Coupler (Quick Connect) with Lead
- The 5050-CON-C5W-L connects the Lead side of the LED strip with lead wires
- The 5050-CON-C5W-T connects the Tail side of the LED strip with tail wires
- 12mm wide
- 12 in long wire
- Used for applying lead at beginning or end of a 5050 RGBW SMD LED Strip
-
SKU# 5050-CON-C4W
- 5050 RGB LED Strip Coupler (Quick Connect) with Lead
- The 5050-CON-C4W-L connects the Lead side of the LED strip with lead wires
- The 5050-CON-C4W-T connects the Tail side of the LED strip with tail wires
- 10mm wide
- 12 in long wire
- Used for applying lead at beginning or end of an 5050 RGB SMD LED Strip
-
SKU# 5050-CON-C2W
- 5050 White LED Strip Coupler (Quick Connect) with Lead wires or Tail wires
- The 5050-CON-C2W-L connects the Lead side of the LED strip with lead wires
- The 5050-CON-C2W-T connects the Tail side of the LED strip with tail wires
- 10mm wide
- 12 in long wire
- Used for applying lead at beginning or end of a 5050 White LED Strip
-
SKU# LED-WIRE-RB-XXHook-Up Wire Red & Black, is especially used to connect LED power supply and LED controller. Red/Black Zip Cord is a low voltage DC power cable. Also called zip wire and bonded wire, the cables pull apart for a quick separation. Easy to identify polarity for DC applications. Excellent for Single Color or white LED Strips, Amateur Radio, Automotive/Stereo, Robotics and R/C.
- Wire 14 AWG: Used for short to mid distances
- Wire 16 AWG: Used for short to mid distances
- Wire 18 AWG: Used for short distances
- Wire 20 AWG: Used for short distances
- Designed to meet UL VW-1 Vertical Wire Flame Test
- RoHS Compliant