-
SKU# RF-MZTRX-RGBWTech Specs for Controller (RF-MZTRX-RGBW):- Input Voltage: 12V – 24V DC
- Max Current per Channel: 6A @12V DC, 3A @ 24V DC
- Remote Control Range: 30 meters (98 ft)
- Controller Dimensions: 85 x 45 x 23mm
- Remote Dimensions: 100 x 52 x 20mm
- Working Temperature: -20˚C – 60˚C (-4˚F – 140˚F)
- 1-year warranty
- A total of 9 programmed sequences to choose from, 5 color rotating sequences and 4 single color sequences
- Wireless RF reliable remote control
- Power off data memory
- Compatibility with AMP-RGBW and AMP-RGBW-HS for unlimited amplification
- Ability to control up tp 4 zones per transmitter remote, and multiple receiver RF controllers
- RGBW Fade in & Fade out
- Color Flash
- Disco
- Red Color Ramp Up & Flash
- Green Color Ramp Up & Flash
- Blue Color Ramp Up & Flash
- Color Change + Flash
- Fade in & Fade out
- Strobe White
Tech Specs for Remote(RF-MZTX):- Operating Voltage: DC 3V (2 x AAA batteries – Not Included)
- Ambient Temperature: -20 C – 60 C
- Operating Frequency: 2.4 GHz
- Net Weight: 47g (1.66oz)
- RF Control Distance: 30m (98.4 ft) in line of sight
- IP Rating: IP40 (Keep dry at all times)
- Dimensions: 119.95 x 52.60 x 20.15 mm (4.72 x 2.07 x 0.79 in)
- Material: High-Quality ABS plastic
- 1-year warranty
- Works for both RGB and RGBW Multi-zone controllers.
- Wireless RF control, up to 30m in-line of sight range.
- Compatible with RF-MZRX-RGB and RF-MZRX-RGBW Receiver Controllers for versatility functions.
- Ability to control up to 4 zones per Transmitter Remote, and multiple Receiver RF Controllers.
-
SKU# RF-MZTRX-1CHQuick Links: RF-MZRX-1CH-Datasheet RF-MZTX-1CH Datasheet -
SKU# SN8-IJISCOMMERCIAL STAGE CABLE PRICE IS PER FOOT 8 Pair w/shield, 24 AWG Snake cable, Black, Per Ft NOTE: PLEASE CONTACT US FOR ROLLS SPECIAL PRICE -
SKU# LO-Z5PRICE IS PER FOOT High performance mic cable 20 gauge conductors with braided shield, Black, Per Ft Applications:- Heavy Duty Microphone Cable
- Signal Cable
- DMX
-
SKU# Rackmount-2The Rackmount-2™ is similar to the original Pocket Console® DMX, except it was designed for permanent installations: Workstations, Stage Manager Panels, LX workboxes, or anyplace else that needs easy access to a fully patchable DMX universe. It comes with both flush mount XLR or terminal block DMX outputs, a 120v-9v Power Supply, eight fully patchable manual sliders plus eight bump buttons. DMX runs at high speed (44Hz) and the RACK MOUNT-1™ utilizes flash memory for a non-volatile patch. Data:- DMX Output: Board mounted terminal block
- Optional FlushMount Faceplate 5 pin XLR available
- Data Output: DMX-512 1990 standard, 44Hz
- Memory: Non-Volatile Flash
- Number of Channels: 8 with Momentary BUMP buttons
- Patch: Fully independent 512 DMX to 1-8 Channels
-
SKU# XSP-OPTO-SPLITTERThe Swisson DMX Opto-Splitter 5 Pin XLR In & Thru - 3 Pin XLR Out, perfect for a user looking to connect another DMX input, without wasting an additional output on the splitter. SWISSON-XSP-5B5-US: The DMX Opto-Splitter 5 Pin XLR In & Thru - 3 Pin XLR Out Box is a compact box structure with one 5 Pin XLR input, one 5 Pin XLR through, and five 3 Pin XLR outputs SWISSON-XSP-5R5-US: The DMX Opto-Splitter 5 Pin XLR In & Thru - 3 Pin XLR Out Single Rack is a rack mountable Opto-Splitter equipped with flanges on both ends, one 5 Pin XLR input, one 5 Pin XLR through, and five 3 Pin XLR outputs SWISSON:XSP-5R5-5R5-US: The DMX Opto-Splitter 5 Pin XLR In & Thru - 3 Pin XLR Out Double Rack is capable of being mounted with the included flanges, equipped with two 5 Pin XLR inputs, two 5 Pin XLR through ports, and ten 3 Pin XLR outputs- ETL/cETL/CE certified
- Optical isolation prevents signal disturbances
- Isolation between input and outputs as well as full isolation between each output
- Simplify connections and reduce installation and cable cost
- Easy detection of disturbances by intelligent DMX protocol supervisor
- Clean and clear amplification of DMX signals
- DMX line can be terminated by pressing a button
- Extend DMX lines infinitely with the splitter
- Strong Power Supply worldwide 5VAC - 276VAC
- Input (1 universe) 1pcs
- Through (1 universe) 1pcs
- Outputs 5 pcs
- Box version, M10 thread for a clamp and an eye bolt for safety line
- Dimensions Rack: 19", 1 Unit, 111 mm, Box: 220x111x44mm
- 2 Year warranty
-
SKU# XSP-OPTO-SPLITTER-5The DMX Opto-Splitter Terminal is equipped with seven terminal ports which allow the user to directly hardwire into a DMX device for permanent fixtures. With the terminal connectors, the user will save money by not having to purchase additional standard connectors. The DMX Opto-Splitter Terminals make it possible to connect directly into the hardware. SWISSON-XSP-5B5-W-US: The DMX Splitter Terminal Box with Wall Mount comes in a compact box configuration with a wall mount and is equipped with 1 input terminal, 1 through terminal, and 5 output terminals. SWISSON-TR5-US: The DMX Splitter Terminal Single Rack has 1 input terminal, 1 through terminal, 5 output terminals and includes mounting flanges for a rack. SWISSON-XSP-TR5-TR5-US: The DMX Splitter Terminal Double has 2 input terminals, 2 through terminals, 10 output terminals and is rack mountable with the included flanges. The DMX Splitter Terminal Double Rack is essentially two single racks side by side.- ETL/cETL/CE certified
- Optical isolation prevents signal disturbances
- Isolation between input and outputs as well as full isolation between each output
- Simplify connections and reduce installation and cable cost
- Easy detection of disturbances by intelligent DMX protocol supervisor
- Clean and clear amplification of DMX signals
- DMX line can be terminated by pressing a button
- Extend DMX lines infinitely with the splitter
- Strong Power Supply worldwide 5VAC - 276VAC
- Input (1 universe) 1pcs
- Through (1 universe) 1pcs
- Outputs 5 pcs
- Box version, M10 thread for a clamp and an eye bolt for safety line
- Dimensions Rack: 19", 1 Unit, 111 mm, Box: 220x111x44mm
- 2 Year warranty
-
SKU# XSR-RDM-OPTO-SPLITTERThe Swisson XSR line of Opto-Splitters are all highly reliable DMX and RDM splitters and boosters with specially designed power supplies to ensure safe operation, even under harsh conditions. With individually optically isolated ports, these splitters are less susceptible to voltage spikes. These RDM & DMX Opto-Splitters boost, regenerate, and distribute both DMX & RDM signals. The Swisson XSR Opto-Splitters are perfect for projects that require demanding DMX performance. SWISSON-XSR-3B-US: RDM & DMX Opto-Splitter Box containing one 3 Pin XLR input, one 3 Pin XLR through, and five 3 Pin XLR outputs. SWISSON-XSR-3R-US: RDM & DMX Opto-Splitter Single Rack equipped with flanges for mounting, one 3 Pin XLR input, one 3 Pin XLR through, and five 3 Pin XLR outputs. SWISSON-XSR-3R-3R-US: RDM & DMX Opto-Splitter Double rack includes mounting flanges, two 3 Pin XLR inputs, two 3 Pin XLR through ports, and ten 3 Pin XLR outputs. SWISSON-XSR-5B-US: RDM & DMX Opto-Splitter Box containing one 5 Pin XLR input, one 5 Pin XLR through, and five 5 Pin XLR outputs. SWISSON-XSR-5R-US: RDM & DMX Opto-Splitter Single Rack equipped with flanges for mounting, one 5 Pin XLR input, one 5 Pin XLR through, and five 5 Pin XLR outputs. SWISSON-XSR-5R-5R-US: RDM & DMX Opto-Splitter Double rack includes mounting flanges, two 3 Pin XLR inputs, two 3 Pin XLR through ports, and ten 3 Pin XLR outputs.
- R Switch to toggle between RDM&DMX compatibility or DMX only mode
- LED Display
- ETL/cETL/CE certified
- Optical isolation prevents signal disturbances
- Isolation between input and outputs as well as full isolation between each output
- Simplify connections and reduce installation and cable cost
- Easy detection of disturbances by intelligent DMX protocol supervisor
- Clean and clear amplification of DMX signals
- DMX line can be terminated by pressing a button
- Extend DMX lines infinitely with the splitter
- Strong Power Supply worldwide 5VAC - 276VAC
- Input (1 universe) 1pcs
- Through (1 universe) 1pcs
- Outputs 5 pcs
- Box version, M10 thread for a clamp and an eye bolt for safety line
- Dimensions Rack: 19", 1 Unit, 111 mm, Box: 220x111x44mm
- 2 Year warranty
-
SKU# XSH-HYBRID-SERIESThe XSH Hybrid Splitter is an innovative design, making it possible to distribute both power and a DMX signal within a single unit. The Hybrid Splitter is equipped with a powerCon 20A input and an XLR input and four pairs of powerCon 20A and XLR outputs. Instead of having to buy two separate pieces of hardware, a power satellite and a DMX splitter, you get both together in a trusty package. With the built-in amp meter, the user can easily keep track of the amount of power consumed, and will be able to ensure cables do not reach their limits. With the RDM option, the user can remotely manage the current draw. SWISSON-XSH-3BD-1P4: The DMX & powerCon Hybrid Splitter 3 Pin XLR Box is DMX compatible with one 3 Pin XLR input, one powerCon input, four 3 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-5BD-1P4: The DMX & powerCon Hybrid Splitter 5 Pin XLR Box is DMX compatible with one 5 Pin XLR input, one powerCon input, four 5 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-3RD-1P4: The DMX & powerCon Hybrid Splitter 3 Pin XLR mountable rack is DMX compatible with one 3 Pin XLR input, one powerCon input, four 3 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-5RD-1P4: The DMX & powerCon Hybrid Splitter 5 Pin XLR mountable rack is DMX compatible with one 5 Pin XLR input, one powerCon input, four 5 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-3BR-1P4: The RDM & powerCon Hybrid Splitter 3 Pin XLR Box is RDM & DMX compatible with one 3 Pin XLR input, one powerCon input, four 3 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-5BR-1P4: The RDM & powerCon Hybrid Splitter 5 Pin XLR Box is RDM & DMX compatible with one 5 Pin XLR input, one powerCon input, four 5 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-3RR-1P4: The RDM & powerCon Hybrid Splitter 3 Pin XLR mountable rack is RDM & DMX compatible with one 3 Pin XLR input, one powerCon input, four 3 Pin XLR outputs, and four powerCon outputs. SWISSON-XSH-5RR-1P4: The RDM & powerCon Hybrid Splitter 5 Pin XLR mountable rack is RDM & DMX compatible with one 5 Pin XLR input, one powerCon input, four 5 Pin XLR outputs, and four powerCon outputs.- LED Display; signal, power
- Optical isolation prevents signal disturbances
- Clean and clear amplification of DMX and RDM signals
- Extend DMX lines infinitely with the splitter
- Strong Power Supply worldwide 50VAC - 276VAC
- Input DMX, 5 Pin XLR or 3 Pin XLR
- Box version: M10 & M12 thread for a clamp an eye bolt for safety line
- Dimensions; Rack LxWxH: 19"x134mmx1Unit
- Powercon input (1pcs)max 20A
- Powercon output (4pcs)max 20A
- Power measurement 2-20 A in 2 A steps
-
SKU# XSP-SERIES-SPLITTERDMX splitters are the backbone of any DMX-512 installation. The XSP series of splitters offer the highest level of reliability for professional use for events or on installations. The specially designed power supply ensures safe operation even under harsh mains conditions. The XSP box models have a thread for a clamp and an eye for the safety line. These models are portable and suitable for truss mounting. The rack and double rack models are for 19“ rack systems. Customize your purchase by choosing from 3 Pin XLR or 5 Pin XLR inputs and outputs. XSP-3B: The DMX Opto-Splitter Box is equipped with one 3 Pin XLR input, one 3 Pin XLR through, and five 3 Pin XLR outputs. XSP-3R: The DMX Opto-Splitter Single rack is a mountable rack with one 3 Pin XLR input, one 3 Pin XLR through, and five 3 Pin XLR outputs. XSP-3R-3R: The DMX Opto-Splitter Double Rack is a mountable rack containing two 3 Pin XLR inputs, two 3 Pin XLR though ports, and ten 3 Pin XLR outputs XSP-5B: The DMX Opto-Splitter Box is equipped with one 5 Pin XLR input, one 5 Pin XLR through, and five 5 Pin XLR outputs. XSP-5R: The DMX Opto-Splitter Single rack is a mountable rack with one 5 Pin XLR input, one 5 Pin XLR through, and five 5 Pin XLR outputs. XSP-5R-5R: The DMX Opto-Splitter Double Rack is a mountable rack containing two 5 Pin XLR inputs, two 5 Pin XLR though ports, and ten 5 Pin XLR outputs XSP-3B-US: The DMX Opto-Splitter Box is ETL/cETL/CE certified and equipped with one 3 Pin XLR input, one 3 Pin XLR through, and five 3 Pin XLR outputs. XSP-3R-US: The DMX Opto-Splitter Single rack is a ETL/cETL/CE certified mountable rack with one 3 Pin XLR input, one 3 Pin XLR through, and five 3 Pin XLR outputs. XSP-3R-3R-US: The DMX Opto-Splitter Double Rack is a ETL/cETL/CE certified mountable rack containing two 3 Pin XLR inputs, two 3 Pin XLR though ports, and ten 3 Pin XLR outputs XSP-5B-US: The DMX Opto-Splitter Box is ETL/cETL/CE certified and equipped with one 5 Pin XLR input, one 5 Pin XLR through, and five 5 Pin XLR outputs. XSP-5R-US: The DMX Opto-Splitter Single rack is a ETL/cETL/CE certified mountable rack with one 5 Pin XLR input, one 5 Pin XLR through, and five 5 Pin XLR outputs. XSP-5R-5R-US: The DMX Opto-Splitter Double Rack is a ETL/cETL/CE certified mountable rack containing two 5 Pin XLR inputs, two 5 Pin XLR though ports, and ten 5 Pin XLR outputs
- Optical isolation prevents signal disturbances
- Isolation between input and outputs as well as full isolation between each output
- Simplify connections and reduce installation and cable cost
- Easy detection of disturbances by intelligent DMX protocol supervisor
- Clean and clear amplification of DMX signals
- DMX line can be terminated by pressing a button
- Extend DMX lines infinitely with the splitter
- Strong Power Supply worldwide 50VAC – 276VAC
- Input (universes) 1pcs, DMX, XLR 5 pin or XLR 3 pin
- Through (universes) 1pcs, DMX, XLR 5 pin or XLR 3 pin
- Outputs 5pcs, DMX, XLR 5 pin or XLR 3 pin
- Box version, M10 thread for a clamp and a eye bolt for safety line
- 2 year warrranty
-
SKU# RJ45-OPTO-SPLITTERThe Swisson RJ45 RDM/DMX Splitter XSR-8B, Swisson RJ45 RDM/DMX Splitter XSR-8R-8R, and the Swisson RJ45 RDM/DMX Splitter XSR-8R are top of the line DMX/RDM splitters and boosters that processes DMX and RDM signals with a high level of reliability for professional applications.- ETL/cETL/CE certified
- Switch for RDM & DMX or DMX only
- LED display; signal, power, RDM
- Optical isolation prevents signal disturbances
- Isolation between input and outputs as well as full isolation between each output
- Simplify connections and reduce installation and cable cost
- Easy detection of disturbances by intelligent DMX and RDM protocol supervisor
- Clean and clear amplification of DMX and RDM signals
- DMX line can be terminated by pressing a button
- Extend DMX lines infinitely with the splitter
-
SKU# XAC-ANT-2.4Replacement antenna for Swisson Wireless Opto-Splitter. SKU# XAC-ANT-2.4
ShopMark Eviota2024-04-02T12:17:21-05:00
