Direct DMX RGBW UL LED Strip Pixel by Pixel Control 2.0

SIRS-E

Direct DMX RGBW UL LED Strip
DMX 5 RGBWN REEL
Direct DMX Digital RGBW 5V Series Tail
DMX RGBWN BACK 3M

DMX-5RGBWN-32XX

Direct DMX RGBW UL LED Strip Pixel by Pixel Control 2.0

SIRS-E

SIRS-E® Direct DMX RGBW LED strip utilizes direct DMX512A signal to control a pixel by pixel programmable flexible tape light via the software of your choosing. The red, green, blue and white (5500K) diodes can be mixed to potentially produce over a billion color rendering options. This model requires 5V power from both ends, is cuttable every LED, and mountable using 3M adhesive tape. 5-pin XLR connector included with every reel.

NVLAP: National Voluntary Laboratory Accreditation Program is a National Institute of Standards and Technology program in the USA which provides an unbiased third-party test and evaluation program to accredit laboratories in their respective fields to the ISO 17025 standard. NVLAP is in compliance with ISO 17011. Wikipedia

Video(s):

Quick Links:

All photometric and electrical data for SIRS-E® and our ODM LED Tape are measured in compliance with IES LM–79–24 and ANSI C82.77:2002. Our colorimetric data follow IES TM–30–24, CIE 013.3–1995, CIE 15:2018, and the chromaticity specifications of ANSI C78.377–2024. Lifetime and lumen maintenance data are tested in accordance with ANSI/IES LM–80–21. Where applicable, SDCM (Small Deviation of Color Matching), also referred to as the MacAdam ellipse, is used to define color consistency, referencing Specification of Small Chromaticity Differences by David L. MacAdam.

Accessories: DMX Address Writer – DMX-STRIP-PROG2 Quick Guide

Categories: , Tags: , ,
Input Voltage: 5V DC Cut / Readdress: Cuttable and Readdressable at every pixel1
Control Method: DMX512 Control – Pixel by Pixel Reel Length: 13.1 ft | 4 m
Power Consumption: 3.50 W/ft Max Run Length: 13.1 ft | 4 m, powered from both sides
LED Chip Type: High Quality SMD 4-Diode RGBW Segment Width: 0.56 in (14 mm)
LED Density: 9 LEDs/ft | 32 LEDs/m Luminous Flux Maintenance: 75,000 hrs2
Channels / Pixels: 4 Channels per Pixel (512 Channels Total)4 Dimming: DMX512 Control – Pixel by Pixel
Board Type / Color: 3 oz Density Copper, Black PCB Environmental: IP 67/68 – Dry and Damp Locations
Operating Temperature: -20°F to 120°F Warranty: 5 Year Limited
Mounting: Non-porous; 3M Adhesive Mounting Tape Certifications: UL Listed E479339
For more information, please see the pdf DMX RGBW Datasheet here.

 

Product Photometrics – Red, Green, and Blue Diodes3

Color Diode Peak Wavelength (nm) Dominant Wavelength (nm) CIE (x, y) Luminous Flux (lm/ft) Luminous Efficacy (lm/W)
RED 632 nm 622 nm (0.6938, 0.3050) 23 lm/ft 17 lm/W
GREEN 515 nm 520 nm (0.1351, 0.7104) 47 lm/ft 35.8 lm/W
BLUE 463 nm 468 nm (0.1368, 0.0567) 11 lm/ft 8.2 lm/W

For Mobile display only – Above table titles – Color Diode, Peak Wavelent (nm), Dominant Wavelength (nm), CIE (x, y), Luminous Flux (lm/ft), Luminous Efficacy (lm/W)

Product Photometrics – White Diodes Only3

Nominal CCT (K) Luminous Flux (lm/ft) Luminous Efficacy (lm/W) CIE (x, y) Duv CRI Fidelity (Rf) Gamut (Rg)
5578 K 58 lm/ft 43.6 lm/W (0.3306, 0.3475 +0.0041 82.6 84 95

For Mobile display only – Above table title – Nominal CCT (K), Luminous Flux (lm/ft), Luminous Efficacy (lm/W), CIE (x, y), Duv, CRI, Fidelity (Rf), Gamut (Rg)

Product Photometrics – All Four Colors at Full Intensity3

Nominal CCT (K) Luminous Flux (lm/ft) Luminous Efficacy (lm/W) CIE (x, y) Duv CRI Fidelity (Rf) Gamut (Rg)
11316 K 130 lm/ft 28.8 lm/W (0.2766, 0.2771) +0.0034 60.5 69 105

For Mobile display only – Above table title – Nominal CCT (K), Luminous Flux (lm/ft), Luminous Efficacy (lm/W), CIE (x, y), Duv, CRI, Fidelity (Rf), Gamut (Rg)

  SKU# DMX-5RGBWN-32XX

Legacy Product

DMX RGBW LED Strip 4 in 1 Direct DMX512A Pixel-by-Pixel Control
5050-5RGBWN-32XX Datasheet
DMX Cable RGBW Color Code
DMX Filter
Legacy SKU# 5050-5RGBWN-32XX

Environment

IP67 – Water Resistant, IP68 – Waterproof