Select Page
Sale!
HPD3400PFC.jpg

Proel HPD3400PFC Digital Amplifier

$2,200.00 $1,699.00

Condition: New


Out of stock

The HPD3400PFC features an amplification section based on an improved version of Pulse Width Modulation technology. The innovative topology of the amplification circuit and the very high sampling rate ensure very high performance in the whole audio range, whereas new-generation semi-conductors and the innovative signal reconstruction filter guarantee excellent audio quality. The new power supply section provides full output power with any mains voltage (150 V to 264 V: 230 V model, 85 V to 132 V: 120 V model – 50/60 Hz) and include the PFC (Power Factor Correction), able to guarantee that the AC input current wave form is sinusoidal and in phase with the mains voltage wave form. Thanks to the high efficiency of the power section and to the new power supply section we’ve been able to keep the weight of these amplifiers low to facilitate transportation and set up. The protection system includes thermal protection, short circuit protection, high frequency protection and a CLIP LIMITER circuit. Several user configurations can be selected in the input section STEREO/BRIDGE/PARALLEL) as well as several filtering options (FLAT/BI-AMP/HPF).

 

SKU: HPD3400PFC

Product Description

The HPD3400PFC features an amplification section based on an improved version of Pulse Width Modulation technology. The innovative topology of the amplification circuit and the very high sampling rate ensure very high performance in the whole audio range, whereas new-generation semi-conductors and the innovative signal reconstruction filter guarantee excellent audio quality. The new power supply section provides full output power with any mains voltage (150 V to 264 V: 230 V model, 85 V to 132 V: 120 V model – 50/60 Hz) and include the PFC (Power Factor Correction), able to guarantee that the AC input current wave form is sinusoidal and in phase with the mains voltage wave form. Thanks to the high efficiency of the power section and to the new power supply section we’ve been able to keep the weight of these amplifiers low to facilitate transportation and set up. The protection system includes thermal protection, short circuit protection, high frequency protection and a CLIP LIMITER circuit. Several user configurations can be selected in the input section STEREO/BRIDGE/PARALLEL) as well as several filtering options (FLAT/BI-AMP/HPF).

Power Supply  :  150 V – 264 V: 230 V model or 85 V – 132 V: 120 V model
50/60 Hz


Maximum Power Consumption  : 


3450 VA

Input Connectors  : 2 x NEUTRIK Combo + 2 x NEUTRIK XLR-M
Output Connectors  : 2 x NEUTRIK Speakon + 1 x NEUTRIK Speakon Bridge
Dimensions (W x H x D)  : 483 x 89 x 383 mm
Damping Factor  : 20 Hz – 1000 Hz > 200 @ 4 ohm
Gain  : 32 dB (40 dB internally selectable)
Input Impedance  : 30 kO balanced
15 kO unbalanced

Input Sensitivity  : 8 dB (0 dB)
Indicators (LED)  : Protect, Signal, Bridge, Limit
Notes  : Selectable filtering options: FLAT, 100 Hz selectable HPF, 100 Hz 24 dB/Oct BI-AMP crossover
GND lift switch

Weight  : 11   kg(24.255lb )
Power consumption  : Rated 1/8 power output 900 VA
Output Power (THD<1% 1kHz) Bridge Mono 8ohm  : 3400 W
Output Power (THD<1% 1kHz) Stereo 4+4ohm  : 2 x 1700 W
Output Power (THD<1% 1kHz) Stereo 8+8ohm  : 2 x 1100 W
Protections  : DC, thermal, soft start, short circuit
Cooling  : Front-to-rear air flow, variable speed DC fans, removable dust filters
S/N Ratio  : > 105 dB unweighted
Frequency response  : 10Hz – 20kHz (+0 / -1 dB)
System type  : 2-channel Power Amplifier with PFC
Rack Units  : 2 U

   

2 Channel Power Amplifier with PFC (Pulse Width Modulation)

 

2 x 1700 W 4 Ohm

 

2 x 1100 W 8 Ohms

 

3400 W 8 Ohm Bridge Mode

 

100% MADE IN ITALY

 

  • Specifications and User Manual

Reviews

There are no reviews yet.

Be the first to review “Proel HPD3400PFC Digital Amplifier”