DMX-SYNC Data Synchronizer
- 432W Max
- IP Rating IP40, Non-Waterproof
- Input: 12-24V DC
- Output: To LED
- Flicker Free: 5.2 kHz
- Part Number: DMX-SYNC-X
The DMX-SYNC allows you to have continuous LED strip runs while minimizing voltage drop on a continuous circuit while maintaining DMX flicker free control for dimming and/or color mixing. The DMX-SYNC prevents flickering caused by multiple DMX decoders de-synchronizing when connected to the same strip.
Voltage drop on RGB and RGBW will prevent uniform color distribution across an LED strip. This is critical for lighting applications such as LED displays, TV studio lighting, cove lighting, large building facades, architectural lighting, and other high end applications. With this product, you can decide what percentage of voltage drop you want to have by putting DMX controllers and DMX-SYNCs as needed on a continuous circuit (refer to application diagram above).
The DMX-SYNC works by converting a digital signal (PWM) into an analog voltage to avoid frequency desynchronization and provide a more stable, flicker-free control. The enclosure is built with a high-quality ABS material and the internal components are encapsulated with epoxy resin for maximum durability, heat dissipation, protection, and performance.
Not compatible with magnetic low voltage power supplies.
You may also like…
LED Controller Power Supply USA/EU 200 Watts 24VSKU: LED-PS24V-200W
LED Controller Power Supply, USA/EU 200 Watts, 12VSKU: LED-PS12V-200W
Heavy Duty RJ45 Signal Terminator for DMX DriverSKU: RJ45-TERN-MK2 $7.00
Heavy Duty CAT5, RJ45 to RJ45, 6ft long CableSKU: RJ45-6F-MK2 $14.00
Heavy Duty RJ45 to XLR 3 Pin DMX Cable Adapters, 3ftSKU: RJ45-MK2 $15.00
Heavy Duty RJ45 to XLR 5 Pin DMX Cable Adapters, 3ftSKU: RJ45-MK2-5 $19.00–$22.00