Description
The eDIN 1016 DMX/RDM Hub brings flexibility to single universe DMX512 distribution systems. Through use of automatic signal sensing, across four operating modes, any port may detect incoming DMX signals and act as an input; or two inputs may be merged; the user may choose between inputs; or a priority scheme may be invoked. RDM discoverable and configured.
Features:
- Eight bi-directional ports
Four operating modes
Simple UI for mode selection
Automatically locates incoming DMX signal and routes according
to current mode
Automatically switch between inputs on priority
External A/B switch for user selection of input
Merge two inputs to remaining outputs
Act as automated signal patch bay
Auto-termination of inputs
Port direction LED indicators, as well as power and function
E1.20 Remote Device Management support in routing modes
Hold last look time and output speed user-settable by RDM
Multi-level cascade of modules permitted
Pluggable terminal block connections accept solid or stranded
wire between #26 and #16 AWG
Power easily daisy-chained between modules
Firmware @eld-upgradable using RDM (requires Pathway
Pathport node and RDM utility program)
Specifications:
- 250V fault protection on input and output ports
Input operating voltage: 9-30 VDC
5W power consumption
Operating conditions: -10to +50°C; 10-90% relative humidity,
non-condensing
Standards Compliance:
- ANSI E1.11 DMX512-A(2008)/USITT DMX512(1990)
ANSI E1.20 RDM(2010) – Remote Device Management
RoHS 2002/95/EC
Class 2 Low Voltage
Included Furnishings:
- DIN tray (housing) with end caps
12” (300mm) x 35mm DIN rail
Installation/Operations manual