Description
PATHPORT C-SERIES NODE, 1 INPUT & 1 OUTPUT
Pathport C-series nodes are suitable for permanent wall installation or portable use.
Features:
- *NEW* Now supports ETC Net2 as an DMX output node
- *NEW* Crossfade between inputs on loss or gain of signal
- *NEW* E1.31 streaming ACN input priority and magic channel input selection
- Works with both final draft and ANSI standard streaming ACN
- Two DMX512 ports
- Distribute up to 128 DMX universes Fully compliant with E1.20 Remote Device Management standard
- Powerful DMX routing capabilities
- Patch on a universe or channel-by-channel basis
- Discover up to 128 RDM-enabled devices per node
- Many DMX network products in one:
Channel patch
Backup switch
Priority switch
Merger
Manager - LCD screen provides status feedback and soft-labelling capabilities
- Powered directly over Ethernet Cat 5 cable (POE)
- Easy system configuration
- Low installed cost
- Fits in a standard recessed 2 gang electrical backbox
- ETL listed
Input AND Output Version of Pathport’s C-SERIES
Supports the following Ethernet Protocols:
- Strand ShowNet
- Pathport
- ArtNet
- E1.31 streaming ACN (sACN/Net3)
- ETC Net2 (output only)
Model Description:
6201 | Pathport C Node with 2 – DMX inputs |
6202 | Pathport C Node with 2 – DMX outputs |
6203 | Pathport C Node with 1 DMX input & 1 DMX output |
Accessories:
6901 | Surface Mount Enclosure Required for surface mounting |
6911 | Portable Enclosure For portable or hanging use. Includes Neutrik EtherCon RJ45 |
6001 | Pathport single node in-line power injectorPathport power injector is not required if PoE-enabled switch is used |
6010 | Pathport Manager software on CD (free download available) |