Description
eDIN DMX/RDM SPLITER 4-WAY
Full opto-isolation and RDM-compatibility now available in eDIN repeaters. More than a mere DMX512 opto-splitter, the Pathway eDIN RDM Repeater supports the bi-directional communication necessary for using E1.20 RemoteDevice Management in installations that require star-wiring layouts. All portsare fully opto-isolated and independently protected from fault voltages.
Features:
- DMX512-A and E1.20 RDM compliant
- All ports opto-isolated from each other to protect against ground loops and common voltage faults
- Self-resetting poly-switch fuses
- RDM can be disabled, to accomodate legacy equipment
- eDIN DMX/RDM Splitter discoverable with RDM
- DMX Thru connector fully supports RDM
- Data can be ‘daisy-chained’ through up to 7 cards
- Indicator LEDs for power and data
- Available as a module alone, or as pre-built installation repeaters in 4-, 8- or 12-output enclosures
- When factory-installed in a Pathway enclosure, the assembly is ETL-listed
Models:
Part Number | Description |
1009 | eDIN DMX/RDM Splitter, 1 input/4 outputs plus pass-through |
4813 | 4 way eDIN DMX/RDM Installation Repeater |
4814 | 8 way eDIN DMX/RDM Installation Repeater |
4815 | 12 way eDIN DMX/RDM Installation Repeater |