-
SKU# IA-HARD-001013MADRIX® USB light sensor This sensor measures the ambient light level. The small unit can simply be connected to any USB 2.0 port. Incoming values are directly translated into DMX data in MADRIX® as well as percent. Example of use: Master Fader SKU# IA-HARD-001013 -
SKU# XMT-120AIncludes DMX Tester Tool, 3 Pin XLR to 5 Pin XLR converters, and soft carrying case. The XMT-120A is the new generation of powerful DMX512 measurement and test equipment for architecture, entertainment, film and TV lighting and installations using DMX512. The versatile functions of the XMT-120A simplify the debugging of lighting and installations, or any application where DMX is used to control lighting. The unit can monitor DMX512 signals as well as analyze and display them. The device can also generate DMX512 signal and supports the control of more complex DMX512 fixtures such as moving lights. The testing of RGB LED lighting with many channels is easy to do with the XMT-120A. With additional features such as cable tester, timing analysis, sequence editor, channel "tracer", dip-switch display, flicker finder, and Min / Max display this device is ideal for troubleshooting and resolving DMX512 signal challenges and yet remains very simple to operate. The XMT-120A can be connected via USB to a PC. The Windows software allows for managing the fixture library for intelligent devices and uploading firmware updates.- DMX receiver
- DMX transmitter
- RGB LED control
- Moving light control
- Cable tester
- Channel tracer
- Dip-switch display
- Programmable sequence
- Timing analyzer
- Adjustable DMX frame rate
- PC software
- And more
-
SKU# XMT-350Includes RDM/DMX Tester Tool, 3 Pin XLR to 5 Pin XLR converters, and soft carrying case. The XMT-350 is a compact and modern RDM controller and DMX tester. RDM-enabled devices can be monitored and controlled with the XMT-350. For example, the DMX addresses can be set remotely. The XMT-350 automatically detects and lists all reachable RDM devices. The DMX patch mode from the XMT-350 simplifies the installation. The user selects the desired order of the fixtures and the XMT-350 patches the devices automatically. Status information such as the burning time of the lamp can be read directly on the XMT-350. The user doesn’t have to go to the fixture. The XMT-350 can also monitor DMX signals and display them graphically. It can generate DMX512 signals and supports the control of complex devices like DMX512 moving lights. The testing of RGB LED lighting with a large quantity of channels is easy with the XMT-350. The simple and user-friendly operation and the extra features such as cable testers, timing analysis, sequence editor, channel "tracer", dip-switch display and min / max display makes the XMT-350 ideal for troubleshooting DMX512 installations.
- RDM controller
- Set DMX address remotely
- Set "Personality" mode remotely
- Readout RDM device information
- Automatic DMX patch support over RDM
- DMX receiver
- DMX transmitter
- RGB LED control
- Moving light control
- Cable tester
- Channel "tracer"
- Dip-switch display
- Programmable sequence (Chaser)
- Timing analysis
- Configurable frame rate
- PC software
-
SKU# POCKET-CONSOLEBasic-Pocket-Console SKU: Basic-Pocket-Console The Pocket Console® is the inexpensive source for the smallest, most graphic “hands-on” and “user-friendly” DMX-512 theatrical lighting console made. A user-friendly, portable and lightweight lighting console. Playback-8-Pocket-Console SKU: Playback-8-Pocket-Console The Pocket Console® with 8 fully recordable submasters in the new PLAYBACK-8™ software. In this version, THE POCKET CONSOLE® DMX PLAYBACK-8, it is not just a single scene playback anymore, but is now a recording console. Completely portable and lightweight lighting console. Pelican™ Hard Case not included. dmXact-Pocket-Console SKU: dmXact-Pocket-Console Allows real-time output in DMX 0-255, DMX% 0-100 and binHex 00-FF readout of faders. EXCELLENT test tool giving precise output data. Completely portable and lightweight lighting console. MultiPatch-Pocket-Console SKU: MultiPatch-Pocket-Console The Pocket Console® with 8-Page Patch (Moving Light and Ballroom Multi-Patch) allows EIGHT discreet pages of patch configurations! 24-Eight-Pocket-Console SKU: 24-Eight-Pocket-Console The Pocket Console® 24-Eight is a 24 Channel, 8 Submaster, single DMX universe console. The console allows up to 512 DMX addresses to be patched through 24 channels across three banks of 8 faders. Channel Bank assignment can be easily managed as necessary during your operations to give you access to all 24 channels. In addition to the Channel Mode, the Pocket Console® 24-Eight offers multiple features, including a Patch Mode, Playback Mode and Record Mode, to make this an all-round lighting console. Features:- Optional Pelican Cases are available
- small, lightweight, portable and designed to be hand held
- Levels are set using eight faders (slider pots)
- Each FADER has an associated bump button
- 512 dimmer addresses are patchable to any of the eight faders
- The faders are patchable using from 0 to 512 dimmer addresses per fader
- The unit is powered by a 9v battery OR by a 120v AC power supply
- 9 Volt Alkaline Battery Life – 3 hours minimum
- 120v AC adapter
- Number of DMX dimmer addresses supported – 512
- Number of Faders – 8 with bump buttons
- Data output – DMX-512 1990 standard
- Data Speed: 44hz
- Comes with instructions & 90 day warranty
- Basic Pocket Console User Manual
- Playback 8 Pocket Console User Manual
- dmXact Pocket Console User Manual
- MultiPatch Pocket Console User Manual
- 24-Eight Pocket Console User Manual
-
SKU# Best-Boy-2-Pocket-ConsoleThe Baxter BEST BOY-2™ Pocket Console® is the source for the TOUGHEST, smallest, most graphic “hands-on” and “user-friendly” DMX-512 theatrical lighting console ever made for your hands. FEATURES- Levels are set using eight faders (slider pots)
- Up to 8 Sub-master scenes can be recorded
- Each FADER has an associated bump button
- Flushmount power and DMX I/O receptacles are on the side of the 1060 case
- The faders are patchable using from 0 to 512 dimmer addresses per fader
- The unit is powered by a 9v battery OR by a 120v AC power supply
- Built to take it in an armored case with an etched faceplate
- 9 Volt Alkaline Battery Life – 3 hours minimum
- 120v AC adapter
- Number of DMX dimmer addresses supported – 512
- Number of Faders – 8 with bump buttons
- Data output – DMX-512 1990 standard
- Data Speed: 44hz
- Comes with instructions & 90-day warranty
- BCI - Baxter Controls, Inc
-
-
SKU# IA-HARD-001011MADRIX® USB contact closure This digital input device registers if its circuit is either open or closed. In most cases, it is used to build a switch or trigger. The small unit can simply be connected to any USB 2.0 port. Incoming values are directly translated into DMX data in MADRIX®. Example of use: Strobe or Blackout. SKU# IA-HARD-001011 -
SKU# IA-HARD-001012MADRIX® USB temperature This small and durable sensor measures the temperature. The small unit can simply be connected to any USB 2.0 port. Incoming temperature values are directly translated into DMX data in MADRIX® as well as degree Celsius or degree Fahrenheit. Example of use: SCE Ticker. SKU# IA-HARD-001012 -
SKU# Rackmount-2The Rackmount-2™ is similar to the original Pocket Console® DMX, except it was designed for permanent installations: Workstations, Stage Manager Panels, LX workboxes, or anyplace else that needs easy access to a fully patchable DMX universe. It comes with both flush mount XLR or terminal block DMX outputs, a 120v-9v Power Supply, eight fully patchable manual sliders plus eight bump buttons. DMX runs at high speed (44Hz) and the RACK MOUNT-1™ utilizes flash memory for a non-volatile patch. Data:- DMX Output: Board mounted terminal block
- Optional FlushMount Faceplate 5 pin XLR available
- Data Output: DMX-512 1990 standard, 44Hz
- Memory: Non-Volatile Flash
- Number of Channels: 8 with Momentary BUMP buttons
- Patch: Fully independent 512 DMX to 1-8 Channels
-
SKU# Baxter-9VPSReplacement adapter for Pocket Console™. Tech Specs- Output voltage: 9 VDC
- Output current: 200 mA
- Output power: 1.8 watts
- Output connector: 1.3mm x 3.5mm right angle female barrel plug
- Polarity: Center positive
- Size: 2.4"H x 1.7"W x 1.5"D
- Case color: Black
- Output cord length: 6 feet
- Weight: 0.4 lbs
- Agency approval: UL/CSA
Main 281-324-0908 | 9AM - 6PM M-F (CDT)
SUBSCRIBE TO OUR NEWSLETTER
We take pride in designing LED strips right here in Houston, Texas, USA, and manufacturing a majority of them locally. Our commitment to American production supports the local industry and ensures high-quality products. God Bless America!
